Supramolecular helical mesomorphic polymers. Chiral induction through H-bonding

The work described here concerns a challenge of general interest in supramolecular chemistry: the achievement of chiral helical organizations with controlled structures. This work provides a strategy to obtain supramolecular polymers in which a chiral helical conformation has been induced by a noncovalent association, that is, through hydrogen bonding. Polycatenar 2,4,6-triarylamino-1,3,5-triazines, which organize into columnar mesophases and are susceptible to H-bonding interactions, were chosen as a starting point to build up the chiral supramolecular structure. The stacking of these mesogens has been forced to wind in a helical way by means of H-bond association with (R)-3-methyladipic acid, within the mesophase. The optically active columnar organization has been studied in depth by optical microscopy, differential scanning calorimetry (DSC), X-ray diffraction, and circular dichroism. Formation of stable complexes between the triazine units and (R)-3-methyladipic acid has also been investigated by means of NMR diffusion-ordered spectroscopy (DOSY) experiments in chloroform.     

Probing the hydride transfer process in the lumiflavine-1-methylnicotinamide model system using group softness

The hydride transfer process between the isoalloxazine moiety of flavins and the nicotinamide moiety of NAD(P)H has been explored by using density functional theory based reactivity index in the 1-methylnicotinamide-lumiflavine model system. Based on crystallographic data available, we have found that the group softness index helps to locate and orientate reactive regions in these interacting molecules while the electrophilicity index successfully describes the reactivity pattern of this system.     

Determination of ageing time of spirits in oak barrels using a headspace–mass spectrometry (HS-MS) electronic nose system and multivariate calibration

The aromatic composition of sugar cane spirits and, in general, of alcoholic beverages, is mainly influenced by the ageing process in wood barrels. There are several factors that affect the quality of the final aged product, but the time of the storage in the barrel is perhaps the most important one. Ageing time must therefore be controlled in order to detect counterfeits; however, this parameter is very difficult to control and, at present, there is no analytical method available to determine it. We propose a quantitative method for determining the ageing time of sugar cane spirits in oak barrels by using an electronic nose based on coupling directly a headspace sampler to a mass spectrometer (HS-MS), and multivariate calibration. The method developed is simple and provides, in 5 min, the ageing time of spirits with an accuracy of about 1 month.     

Complexes of TiCl4, VCl4 and SnX4 (X = Cl or Br) with Schiff bases derived from 2-aminobenzimidazole

Summary The reactions of anhydrous titanium(IV), tin(IV) and vanadium(IV) halides with Schiff bases derived from 2-aminobenzimidazole and 4-methylbenzaldehyde (abimbz) and salicylaldehyde (abisal), yield hexacoordinated complexes M(abimbz)Cl₄ and M(abisal)₂X₄ (M = Ti, Sn or V; X = Cl or Br).The compounds have been characterized by elemental analyses, magnetic measurements, e.p.r., electronic and i.r. spectral studies. I.r. spectra suggest that the Schiff base (abimbz) is coordinated as a bidentate ligand with the metal ion and the (abisal) base acts as a monodentate ligand.     

Polymerization photoinitiated by carbonyl compounds. VI. Mechanism of benzil photoinitiation

The mechanism of the photoinitiation of the vinyl polymerization sensitized by benzil and 4,4′-dimethoxybenzil was studied. The monomers considered were methacrylic acid esters and styrene derivatives. All these monomers are efficient quenchers of the excited triplet benzil. However, the initiation efficiency of the benzil is important only when styrene derivatives are employed as monomers. The main polymerization process follows a simple free radical mechanism. The initiation step is a consequence of the interaction (triplet benzil–monomer double bond) through a charge transfer complex.     

Complexes of divalent nickel and copper with the Schiff base derived from 2-(2-aminophenyl)benzimidazole and benzaldehyde

Summary The reactions of divalent nickel and copper salts with the Schiff base derived from 2-(2-aminophenyl)benzimidazole and benzaldehyde, L, yield complexes of general formulae [CuL₂X₂] (X=Cl, Br, or ClO₄), [CuL(SO₄)], [CuL(SO₄)] · 4H₂O, and NiLX₂ (X=Cl, Br, or NCS).All the complexes have been characterized by elemental analyses, magnetic measurements, e.s.r. electronic and i.r. spectral studies. The results show that the Schiff base acts as bidentate ligand through the pyridine-like imine nitrogen of imidazole ring and the azomethine nitrogen. Tentative structures of the complexes are suggested.     

Chiral N-alkyl-2,4,6-triphenylpyridiniums as enantioselective triplet photosensitizers. laser flash photolysis and preparative studies

Three N-alkylpyridinium photosensitizers having chiral alkyl groups have been prepared by reacting 2,4,6-triphenylpyrylium tetrafluoroborate ion with (1R,2S)-(-)-norephedrine, (S)-(+)-2-(aminomethyl)pyrrolidine, and (R)-(-)-1-cyclohexylethylamine. Laser flash photolysis allows detection of the corresponding triplet excited states that are quenched by hydrogen atom donors and electron donors. Asymmetric quenching of the chiral triplet excited state was observed using enantiomerically pure 1,2-diamino cyclohexane as quencher. Low enantiomeric excess values (up to 7%) were measured for the photochemical cyclization of 5-methyl-4-hexenoic acid to its corresponding gamma-lactone using these chiral N-alkylpyridinium as photosensitizers.     

Aldol condensations over reconstructed Mg-Al hydrotalcites: structure-activity relationships related to the rehydration method

Two different rehydration procedures in the liquid or gas phase have been applied to reconstruct mixed oxides derived from calcined hydrotalcite-like materials to be used as catalysts for aldol condensation reactions. The as-synthesized hydrotalcite, its decomposition product, as well as the reconstructed solids upon rehydration were characterized by XRD, N(2) adsorption, He pycnometry, FTIR, SEM, TEM, (27)Al MAS-NMR and CO(2)-TPD (TPD=temperature-programmed desorption). Compared to the Mg-Al mixed oxide rehydrated in the gas phase (HT-rg), that rehydrated in the liquid phase (HT-rl) exhibits a superior catalytic performance with respect to the aldol condensation of citral with ketones to yield pseudoionones and in the self-aldolization of acetone. The textural properties of HT-rl and HT-rg differ strongly and determine the catalytic behavior. A memory effect led to a higher degree of reconstruction of the lamellar structure when the mixed oxide was rehydrated in the gas phase rather than in the liquid phase, although liquid-phase rehydration under fast stirring produced a surface area that was 26 times greater. This contrasts to typical statements in the literature claiming a higher degree of reconstruction in the presence of large amounts of water in the medium. CO(2)-TPD shows that the number of OH(-) groups and their nature are very similar in HT-rg and HT-rl, and cannot explain the markedly different catalytic behavior. Accordingly, only a small fraction of the available basic sites in the rehydrated samples is active in liquid-phase aldol condensations. Our results support the model in which only basic sites near the edges of the hydrotalcite platelets are partaking in aldol reactions. Based on this, reconstructed materials with small crystallites (produced by exfoliation during mechanical stirring), that is, possessing a high external surface area, are beneficial in the reactions compared to larger crystals with a high degree of intraplatelet porosity.     

The use of Hückel theory charge densities and localization energies for the prediction of kinetic and thermodynamic factors involved in an assumed model for the hydrohalogenation of 1,3-butadiene,isoprene and chloroprene

It is assumed that the first step in the hydrohalogenation of a diene under conditions such that an ionic mechanism is operative involves the formation of a linear carbonium ion via attachment of a proton to the 1-position and that the second step involves addition of the halide ion to either the 2- or 4-positions. If it is also assumed that hyperconjugation plays some non-negligible role in the carbonium ion intermediate, then it turns out that the use of Hückel theory charge densities and localization energies predict (1) that the 1,2-product is kinetically favored in the cases of butadiene and isoprene, (2) that the 1,4-product is kinetically favored in the case of chloroprene, and (3) that the 1,4-product is thermodynamically favored in all of the above systems. All of these predictions appear to be in agreement with available experimental results.

---

Zusammenfassung Bei der Addition von Halogenwasserstoffen an die hier untersuchten Diene wird im Reaktions-ablauf ein lineares Carbeniumion angenommen. Das Proton wird in 1-Stellung addiert und in einem zweiten Schritt wird das Halogenion in 2- oder 4-Stellung angelagert. Weiter wird angenommen, daß Hyperkonjugation beim intermediären Carbeniumion eine Rolle spielt. Aus den mit der Hückel-theorie ermittelten Ladungsverteilungen und Lokalisierungsenergien läßt sich dann voraussagen, daß (1) das 1,2-Produkt bei Butadien und Isopren, (2) das 1,4-Produkt bei Chloropren kinetisch und (3) das 1,4-Produkt in allen Fällen thermodynamisch bevorzugt ist. Diese Voraussagen scheinen mit den bekannten experimentellen Resultaten übereinzustimmen.

---

Résumé On admet que l'hydrohalogénation d'un diène dans des conditions où prévaut un mécanisme ionique comporte comme première étape la formation d'un ion carbonium linéaire par addition d'un proton à la position 1 et comme seconde étape l'addition de l'ion halogène à l'une des positions 2 ou 4. Si l'on admet par ailleurs que l'hyperconjuguaison joue un rôle non négligeable dans l'intermédiaire carbonium, l'emploi de la théorie de Hückel permet de prédire à l'aide des densités de charge et des énergies de localisation (1) que le produit 1,2 est favorable du point de vue cinétique dans les cas du butadiène et de l'isoprène (2) que le produit 1,4 est favorable du point de vue cinétique dans le cas du chloroprène et (3) que le produit 1,4 est favorable du point de vue thermodynamique dans tous ces systèmes. Toutes ces prédictions sont apparemment en accord avec les résultats expérimentaux disponibles.

     

Optimization of culture medium and conditions for penicillin acylase production by Streptomyces lavendulae ATCC 13664

The culture medium for Streptomyces lavendulae ATCC 13664 was optimized on a shake-flask scale by using a statistical factorial design for enhanced production of penicillin acylase. This extracellular enzyme recently has been reported to be a penicillin K acylase, presenting also high hydrolytic activity against penicillin V and other natural aliphatic penicillins such as penicillin K, penicillin F, and penicillin dihydroF. The factorial design indicated that the main factors that positively affect penicillin acylase production by S. lavendulae were the concentration of yeast extract and the presence of oligoelements in the fermentation medium, whereas the presence of olive oil in the medium had no effect on enzyme production. An initial concentration of 2.5% (w/v) yeast extract and 3 microg/mL of CuSO4 x 5H2O was found to be best for acylase production. In such optimized culture medium, fermentation of the microorganism yielded 289 IU/L of enzyme in 72 h when employing a volume medium/volume flask ratio of 0.4 and a 300-rpm shaking speed. The presence of copper, alone and in combination with other metals, stimulated biomass as well as penicillin acylase production. The time course of penicillin acylase production was also studied in the optimized medium and conditions. Enzyme production showed catabolite repression by different carbon sources such as glucose, lactose, citrate, glycerol, and glycine.